Spring Boot + Mybatis多数据源和动态数据源配置方法
作者:司青 发布时间:2023-02-16 17:15:31
网上的文章基本上都是只有多数据源或只有动态数据源,而最近的项目需要同时使用两种方式,记录一下配置方法供大家参考。
应用场景
项目需要同时连接两个不同的数据库A, B,并且它们都为主从架构,一台写库,多台读库。
多数据源
首先要将spring boot自带的DataSourceAutoConfiguration禁掉,因为它会读取application.properties文件的spring.datasource.*属性并自动配置单数据源。在@SpringBootApplication注解中添加exclude属性即可:
@SpringBootApplication(exclude = {
DataSourceAutoConfiguration.class
})
public class TitanWebApplication {
public static void main(String[] args) {
SpringApplication.run(TitanWebApplication.class, args);
}
}
然后在application.properties中配置多数据源连接信息:
# titan库
spring.datasource.titan-master.url=jdbc:mysql://X.X.X.X:port/titan?characterEncoding=UTF-8
spring.datasource.titan-master.username=
spring.datasource.titan-master.password=
spring.datasource.titan-master.driver-class-name=com.mysql.jdbc.Driver
# 连接池配置
# 省略
# 其它库
spring.datasource.db2.url=jdbc:mysql://X.X.X.X:port/titan2?characterEncoding=UTF-8
spring.datasource.db2.username=
spring.datasource.db2.password=
spring.datasource.db2.driver-class-name=com.mysql.jdbc.Driver
由于我们禁掉了自动数据源配置,因些下一步就需要手动将这些数据源创建出来:
@Configuration
public class DataSourceConfig {
@Bean(name = "titanMasterDS")
@ConfigurationProperties(prefix = "spring.datasource.titan-master") // application.properteis中对应属性的前缀
public DataSource dataSource1() {
return DataSourceBuilder.create().build();
}
@Bean(name = "ds2")
@ConfigurationProperties(prefix = "spring.datasource.db2") // application.properteis中对应属性的前缀
public DataSource dataSource2() {
return DataSourceBuilder.create().build();
}
}
接下来需要配置两个mybatis的SqlSessionFactory分别使用不同的数据源:
@Configuration
@MapperScan(basePackages = {"titan.mapper"}, sqlSessionFactoryRef = "sqlSessionFactory1")
public class MybatisDbAConfig {
@Autowired
@Qualifier("titanMasterDS")
private DataSource ds1;
@Bean
public SqlSessionFactory sqlSessionFactory1() throws Exception {
SqlSessionFactoryBean factoryBean = new SqlSessionFactoryBean();
factoryBean.setDataSource(ds1); // 使用titan数据源, 连接titan库
return factoryBean.getObject();
}
@Bean
public SqlSessionTemplate sqlSessionTemplate1() throws Exception {
SqlSessionTemplate template = new SqlSessionTemplate(sqlSessionFactory1()); // 使用上面配置的Factory
return template;
}
}
经过上面的配置后,titan.mapper下的Mapper接口,都会使用titan数据源。同理可配第二个SqlSessionFactory:
@Configuration
@MapperScan(basePackages = {"other.mapper"}, sqlSessionFactoryRef = "sqlSessionFactory2")
public class MybatisDbBConfig {
@Autowired
@Qualifier("ds2")
private DataSource ds2;
@Bean
public SqlSessionFactory sqlSessionFactory2() throws Exception {
SqlSessionFactoryBean factoryBean = new SqlSessionFactoryBean();
factoryBean.setDataSource(ds2);
return factoryBean.getObject();
}
@Bean
public SqlSessionTemplate sqlSessionTemplate2() throws Exception {
SqlSessionTemplate template = new SqlSessionTemplate(sqlSessionFactory2());
return template;
}
}
完成这些配置后,假设有2个Mapper titan.mapper.UserMapper和other.mapper.RoleMapper,使用前者时会自动连接titan库,后者连接ds2库。
动态数据源
使用动态数据源的初衷,是能在应用层做到读写分离,即在程序代码中控制不同的查询方法去连接不同的库。除了这种方法以外,数据库中间件也是个不错的选择,它的优点是数据库集群对应用来说只暴露为单库,不需要切换数据源的代码逻辑。
我们通过自定义注解 + AOP的方式实现数据源动态切换。
首先定义一个ContextHolder, 用于保存当前线程使用的数据源名:
public class DataSourceContextHolder {
public static final Logger log = LoggerFactory.getLogger(DataSourceContextHolder.class);
/**
* 默认数据源
*/
public static final String DEFAULT_DS = "titan-master";
private static final ThreadLocal<String> contextHolder = new ThreadLocal<>();
// 设置数据源名
public static void setDB(String dbType) {
log.debug("切换到{}数据源", dbType);
contextHolder.set(dbType);
}
// 获取数据源名
public static String getDB() {
return (contextHolder.get());
}
// 清除数据源名
public static void clearDB() {
contextHolder.remove();
}
}
然后自定义一个javax.sql.DataSource接口的实现,这里只需要继承Spring为我们预先实现好的父类AbstractRoutingDataSource即可:
public class DynamicDataSource extends AbstractRoutingDataSource {
private static final Logger log = LoggerFactory.getLogger(DynamicDataSource.class);
@Override
protected Object determineCurrentLookupKey() {
log.debug("数据源为{}", DataSourceContextHolder.getDB());
return DataSourceContextHolder.getDB();
}
}
创建动态数据源:
/**
* 动态数据源: 通过AOP在不同数据源之间动态切换
* @return
*/
@Bean(name = "dynamicDS1")
public DataSource dataSource() {
DynamicDataSource dynamicDataSource = new DynamicDataSource();
// 默认数据源
dynamicDataSource.setDefaultTargetDataSource(dataSource1());
// 配置多数据源
Map<Object, Object> dsMap = new HashMap(5);
dsMap.put("titan-master", dataSource1());
dsMap.put("ds2", dataSource2());
dynamicDataSource.setTargetDataSources(dsMap);
return dynamicDataSource;
}
自定义注释@DS用于在编码时指定方法使用哪个数据源:
@Retention(RetentionPolicy.RUNTIME)
@Target({
ElementType.METHOD
})
public @interface DS {
String value() default "titan-master";
}
编写AOP切面,实现切换逻辑:
@Aspect
@Component
public class DynamicDataSourceAspect {
@Before("@annotation(DS)")
public void beforeSwitchDS(JoinPoint point){
//获得当前访问的class
Class<?> className = point.getTarget().getClass();
//获得访问的方法名
String methodName = point.getSignature().getName();
//得到方法的参数的类型
Class[] argClass = ((MethodSignature)point.getSignature()).getParameterTypes();
String dataSource = DataSourceContextHolder.DEFAULT_DS;
try {
// 得到访问的方法对象
Method method = className.getMethod(methodName, argClass);
// 判断是否存在@DS注解
if (method.isAnnotationPresent(DS.class)) {
DS annotation = method.getAnnotation(DS.class);
// 取出注解中的数据源名
dataSource = annotation.value();
}
} catch (Exception e) {
e.printStackTrace();
}
// 切换数据源
DataSourceContextHolder.setDB(dataSource);
}
@After("@annotation(DS)")
public void afterSwitchDS(JoinPoint point){
DataSourceContextHolder.clearDB();
}
}
完成上述配置后,在先前SqlSessionFactory配置中指定使用DynamicDataSource就可以在Service中愉快的切换数据源了:
@Autowired
private UserAModelMapper userAMapper;
@DS("titan-master")
public String ds1() {
return userAMapper.selectByPrimaryKey(1).getName();
}
@DS("ds2")
public String ds2() {
return userAMapper.selectByPrimaryKey(1).getName();
}
总结
以上所述是小编给大家介绍的Spring Boot + Mybatis多数据源和动态数据源配置方法网站的支持!
来源:http://blog.csdn.net/neosmith/article/details/61202084


猜你喜欢
- 在业务开发过程中我们会遇到形形色色的注解,但是框架自有的注解并不是总能满足复杂的业务需求,我们可以自定义注解来满足我们的需求。根据注解使用的
- 本文实例为大家分享了C#实现图形界面的时钟的具体代码,供大家参考,具体内容如下秒针有跳跃两个格子问题,主要是算法耗时没考虑在TimeTick
- 1.springboot启动过程中,首先会收集需要加载的bean的定义,作为BeanDefinition对象,添加到BeanFactory中
- 本文较为详细的分析了vc提示unexpected end of file found的原因。分享给大家供大家参考。具体分析如下:预编译出错,
- 本文实例讲述了java使用dom4j生成与解析xml文档的方法。分享给大家供大家参考,具体如下:xml是一种新的数据格式,主要用于数据交换。
- 在定位JVM性能问题时可能会遇到内存泄露导致JVM OutOfMemory的情况,在使用Tomcat容器时如果设置了reloadable=”
- 一 Flow使用注意事项多个Flow不能放到一个lifecycleScope.launch里去collect{},因为进入collect{}
- 对象POJO和JSON互转public class JsonUtil { /** * JSON 转 POJO &n
- 这篇文章主要介绍了Spring boot整合log4j2过程解析,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有一定的参考学习价值
- 1、使用Adobe PDF Reader控件。从COM组件库中找到Adobe PDF Reader控件,添加到工具箱中。从工具箱中拖入PDF
- 这篇文章主要介绍了新手学习微服务SpringCloud项目架构搭建方法,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有一定的参考学
- 在上面的例子中多次使用到了Thread类的join方法。我想大家可能已经猜出来join方法的功能是什么了。对,join方法的功能就是使异步执
- 帮我们实现各种类型的复杂手势操作。其实例通过静态工厂创建ViewDragHelper一般用在一个自定义ViewGroup的内部。初始化操作
- 拆分实现流程请看下面这张图首先我们得对线程池进行一个功能拆分Thread Pool 就是我们的线程池,t1,t2,t3代表三个线程Block
- 本文实例讲述了C#全局热键设置与窗体热键设置,分享给大家供大家参考。具体实现方法如下:1、窗体热键首先要设置主窗体KeyPreview为tr
- 一、效果图 二、RippleDrawable基本概念介绍 (1)、RippleDrawableRippleDrawable可以实
- 1、MyBatis调用存储过程MyBatis支持使用存储过程的配置。当使用存储过程时,需要设置一个参数“mode”,其值有IN(输入参数)、
- > 此文主要通过WinForm来制作一个休息提醒闹钟,通过设置时间间隔进行提醒,避免沉浸式的投入到工作或者学习当中,战斗的同时也要照顾
- TransactionTemplate的使用总结:在类中注入TransactionTemplate,即可在springboot中使用编程式事
- 自从使用 HttpClient 和 Jsoup 配合编写了几个简单的入门爬虫之后,发现对于绝对路径的需求是很频繁的,因为大部分的网页都写相对